Contact Us

Office Mob: +8615524105871
Office Tel: +86-024-31931990
Office Fax: +86-024-22845391

Home > Knowledge > Content
Reasons why laser cutting cannot be replaced
Jul 26, 2019

    There are many differences between laser cutting and other methods. For some metal parts, we can adopt the punching and shearing method, which is efficient, fast, and low in cost but requires specific molds and tools to be divided and only The laser cutting of the laser splitter can be performed on the thinnest plate. The laser splitting of the laser splitter is more flexible than the splitting method, and the workpiece can be divided and processed at any time without using a mold. It ensures that the cutting process is always consistent with the actual trimming state, without the situation that the two-dimensional scribing does not. The punching process will be difficult or impossible to implement and is therefore not widely used. There is no manual interference between the whole cutting process. From the source, it is guaranteed that the products obtained by each processing are consistent with the digital model, so that the trimming line that can be obtained by several trials can be minimized to only need 3 to 4 times. carry out.

    Laser cutting is currently widely used in the metalworking industry, with high laser cutting speed and high precision. For metal processing, wire cutting has higher precision and can cut thick plates, but its disadvantage is that the speed is very slow, sometimes it needs other methods to perforate and thread to cut, and the cutting size It is also very limited. Laser cutting can punch and cut materials, and the cutting speed is very fast. The processing size range is much larger than the wire cutting.

    Flame cutting is also one of the commonly used cutting processes in the metal field. The thickness range of the cutting is also long and long. However, compared with laser cutting, the quality and precision of the cutting surface are relatively poor, but the thickness and processing range are larger than laser cutting. For the more elaborate ones, the program that uses laser cutting laser cutting and cutting is no longer left with manual correction, but a three-dimensional machining program that is completely consistent with the theoretical trimming line and is directly used for cutting products. For the cutting of sheet metal, aluminum plate, stainless steel and other metal plates, there is an absolute advantage, which is why laser cutting can not be replaced. It is believed that with the increasing demand for laser cutting products, laser cutting will become more popular.

  • Newsletter
  • Categories
  • Contact Us

    Office Mob: +8615524105871
    Office Tel: +86-024-31931990
    Office Fax: +86-024-22845391

  • QR Code
  • Copyright © Liaoning EO Technology Co.,Ltd All Rights Reserved.