Categories
Contact Us
Office Mob: +8618002480485
Office Tel: +86-024-31140175
Office Fax: +86-024-22845391
E-mail:info@eoexport.com
Knowledge
Home > Knowledge > Content
Precautions for fire prevention of metal laser cutting machine
Nov 13, 2017

The use of metal laser cutting machine, should pay attention to good fire prevention measures, take good fire prevention measures, we can guarantee the use of metal laser cutting machine safety. Therefore, we should understand the use of metal laser cutting machine, should pay attention to the fire precautions.

So, when the metal laser cutting machine uses, should pay attention to what fire protection matters?

1, the use of metal laser cutting machine, to check whether the gas path is fully sealed, if there is leakage, it will cause these flammable gases to appear burning phenomenon;

2, metal laser cutting machine to use the best away from open fire, otherwise it is very easy because the temperature is too high and there are fires;

3, do not let metal laser cutting machine point of light always stay in one place, can effectively prevent fire.

Below, metal laser cutting machine in use, must pay attention to the above fire precautions, can guarantee the safety of metal laser cutting machine when using.


  • Newsletter
  • Categories
  • Contact Us
    Office Mob: +8618002480485
    Office Tel: +86-024-31140175
    Office Fax: +86-024-22845391
    E-mail:info@eoexport.com
  • QR Code
  • Copyright © Liaoning EO Technology Co.,Ltd All Rights Reserved.